Iskanje

Hitra namestitev LVT brez prahu na stare podlage.

Z UZIN RenoTop PLUS in UZIN KE 66.

Z UZIN RenoTop PLUS UZIN ponuja večplastni sistem talnih oblog, ki zagotavlja učinkovito zvočno izolacijo in odstranjevanje v prihodnosti, ne da bi pri tem ostali ostanki. Ker je treba nova tla pogosto nameščati v bivalnih ali rabljenih prostorih, mora namestitev podlage čim manj motiti končnega uporabnika. UZIN RenoTop PLUS monterju omogoča, da ustvari podlogo, ki je lahko neposredno izpostavljena obremenitvam in je pripravljena za talne obloge brez visoke ravni hrupa ali prahu. UZIN RenoTop PLUS je sestavljen iz podporne plošče in zgornje plošče, ki vključuje tovarniško naneseno kontaktno lepilo. UZIN RenoTop PLUS je primeren za naknadno polaganje različnih talnih oblog.

Prenesi

Galerija slik: Hitra namestitev LVT brez prahu na stare podlage.

After cleaning the area, install sheets of UZIN PE-foil over the floor and 75 mm up the surrounding walls ensuring a 20 cm overlap over any joints. Then install UZIN Alutape 75, aluminium tape over all joints.
Separate the support and top panels from each other by bending them slightly.
For the first row, cut the support panels in half so they measure 1200 mm long by 300 mm wide. Using a half moon blade cut through the top side and break off. Next, cut through the XPS foam with a second cut.
Cut a support panel to 900 mm long by 300 mm wide and install first in the first row. Install 1200 mm by 300 mm support panels adjacently. Then cut a support panel to 600 mm long by 300 mm wide and install first in the second row. Install 1200 mm by 600 mm support panels adjacently.
Install the panels tightly together and ensure any production edges are butted together. Keep an adequate distance (approx. 10 mm) to the wall. Start with the installation of the top panels after the installation of the first two rows of support panels. Remove the protective adhesive film from the support panel.
Install the top panels offset to the support panel; the first row begins with a 1200 mm by 600 mm panel and the second row with a 600 mm by 600 mm panel. All joints of the support panel are covered by this offset, which produces the extraordinary stability of UZIN RenoTop PLUS.
Insert the top panels into the adhesive on the support panel and tap down over the whole surface with a rubber mallet. Install the UZIN RenoTop PLUS support and top panels in this manner over the entire surface. Finally, roll over the surface with a heavy pressure roller.
Slightly sand the butt joints by hand and vacuum off the floor before starting to install the floor covering. The new floor covering must be installed within 48 hours of installing UZIN RenoTop PLUS. (Reno- Top PLUS is suitable for the installation of LVT, textile floor covering, PVC and multi-ply wood flooring).
On the RenoTop PLUS Mark the starting point of the first row of planks or tiles with a suitable pen. Spread UZIN KE 66 fibrereinforced adhesive over the surface using notch size A2 along the reference line.
Without bending, install the planks or tiles within the short open time along the reference line and press down firmly by hand. After the installation, roll over the whole area using the WOLFF pressure roller. Cut off any protruding remnants of the PE film after the installation of the floor covering.

UZIN RenoTop PLUS je najboljša rešitev za izdelavo akustične in izolirane podlage hitro in brez prahu.

Valentin Zeiler
Tehnične storitve UZIN

UZIN KE 66 Vlakneno lepilo

Nizkoemisijsko, z vlakni ojačano disperzijsko lepilo za talne obloge iz kavčuka, PVC-ja in tekstila

Prikaz izdelka

Inštalacijski sistemi za estrihe, tla in lesena tla

Stroji in posebna orodja za pripravo tal in polaganje talnih oblog

Celotna paleta izdelkov za vgradnjo, obnovo in vzdrževanje lesenih tal

Resin flooring with passion for design

Montažni sistemi za polaganje keramičnih ploščic in naravnega kamna

Werkzeuge für Boden, Wand und Decke