Kako zagotoviti tesnenje pred talno vlago in povečano preostalo vlago v cementnih podlagah?

Z UZIN PE 480.

Dolgo čakanje, da se vlažne podlage posušijo in s tem povezani visoki stroški sušenja predstavljajo težavo zlasti takrat kadar se nam mudi z nadaljevanjem del. Dvokomponentna epoksidna zaščita pred vlago UZIN PE 480 je popolnoma primerna ne le za temeljni premaz in armiranje, temveč tudi za tesnjenje cementnih podlag brez omejitev glede na največjo vrednost preostale vlage.

Uporaba UZIN PE 480 varno zatesni zelo visoke vsebnosti vlage v betonskih tleh ali cementnih estrihih. V kombinaciji z izjemno hitrim temeljnim premazom UZIN PE 280 se ustvari površina, ki predstavlja optimalno vezavo za naslednji sloj izravnalne mase.

Prenesi

Obdelovalni film: Tesniti pred talno vlago in povečano preostalo vlago v cementnih podlagah.

Galerija slik: Tesnilo pred talno vlago in povečano preostalo vlago v cementnih podlagah.

Punch the plastic closure and floor of the cover insert of the combination pack several times with a strong metal punch (or screw driver). Do not forget to wear protective clothing!

Allow hardener liquid to run completely into the resin container.

Mix both components with a drill and stirring attachment in the container without streaks. Now pour this mix into a clean, empty container and mix once more.

Apply Uzin PE 480 immediately and uniformly with a B2 notch size (min. 500 g/m²). Now roll over again with the UZIN nylon fibre roller. The UZIN Epoxy Accelerator can be added to UZIN PE 480 to accelerate hardening and thus the continuation of work. Please observe the corresponding product data sheets.

Apply the Super-Fast Primer UZIN PE 280 to create a rough surface. Apply the primer with a short-nap lamb skin roller or, alternatively, with UZIN nylon fibre roller uniformly, thin and over the whole substrate. Because of the quick drying of UZIN PE 280, the surface can be levelled already after approx. 60 minutes (at 20 °C and 65 % relative humidity).

Mix the levelling compound UZIN NC 170 LevelStar with clear cold water. Use a powerful electrical hand mixer, e.g. the agitator Power X 1300 from WOLFF with the UZIN levelling compound stirrer, for mixing.

Apply the levelling compound UZIN NC 170 LevelStar to the prepared surface. The raking method (notch size R2) can be used as an alternative to levelling. The screed rake from the UZIN product range is recommended for this purpose.

Razvili smo UZIN PE 480 za podlage, ki se ne morejo posušiti do standardno dovoljene preostale vlage, vendar morajo biti vseeno hitro pripravljene za pokrivanje.

Valentin Zeiler
Tehnične storitve UZIN

UZIN PE 280 Hitri predpremaz

Disperzijski temeljni premaz s karbonsko tehnologijo za gladko in tesno podlago

Tehnični list

Prikaz izdelka