Kako prihranite čas ob uporabi izravnalnih mas na osnovi mavca.

Z UZIN NC 112 Turbo.

Izravnalne mase na osnovi mavca so idealne za uporabo na problematičnih podlagah, na primer na mešanih podlagah in lesenih podlagah ali starih asfaltnih estrihih iz bitumna. V preteklosti je bila pomanjkljivost izdelkov na osnovi mavca njihov zelo počasen čas sušenja.

Inovativna formula UZIN NC 112 Turbo s "Super hitro tehnologijo" predstavlja svetovno novost, saj združuje prednosti izdelkov na osnovi mavca in prednosti cementnih izravnalnih mas. Talne obloge lahko namestite že v 6 urah. To izvajalcem omogoča hitro napredovanje del na problematičnih podlagah, ne da bi prihajalo do zamud zaradi dolgih časov sušenja.

Prenesi

Galerija slik: Kako lahko prihranite čas pri uporabi izravnalnih mas na osnovi mavca kot dela talnega sistema?

Grind the area with a WOLFF grinding machine to remove poorly adhering residues and dirt.

Next, clean the area from dust and dirt using a powerful vacuum cleaner.

Apply an even coat of UZIN PE 360 PLUS primer using a short-pile lambs wool roller or the UZIN nylon fibre roller. Allow to dry for approx. 30–60 minutes.

Mix the rapid drying gypsum based levelling compound UZIN NC 112 Turbo with clear, cold water.

The amount of dust generated when opening and mixing UZIN NC 112 Turbo can be reduced by using a UZIN Ripper and a powerful WOLFF Mixing Drill such as the Power X 1300.

Pour the mix onto the substrate and distribute evenly with a smoothing trowel or WOLFF screed rake with a R2 notch size.

Depending on the depth of levelling compound select a suitable WOLFF spike roller to remove air.

The floor covering can be installed after 6 hours. It also produces a very smooth surface so sanding is often not necessary, which saves additional time. Please observe the correct indoor climate before installation.

Spread UZIN KE 66 fibre reinforced wet adhesive over the surface using a suitable notched trowel.

Install the rubber flooring and rub over the surface within the short open time. After the installation, roll over the whole area using the WOLFF pressure roller.

S časom sušenja le šest ur pri debelini do 5 mm UZIN NC 112 Turbo postavlja nov standard, ko je mogoče talne obloge namestiti na izravnalne mase na osnovi mavca.

Valentin Zeiler
Tehnične storitve UZIN