Kako lahko hitro izravnamo večje neenakomernosti z izjemno majhno površinsko težo?

S sistemom UZIN Turbolight®.

Obnovitve stanovanj in stavb pogosto pomenijo nepričakovane izzive za obrtnike in načrtovalce. Omejena obremenitev ali višina vgradnje, spuščeni stropi, zahtevajo ustrezno talno konstrukcijo. Sistem Turbolight® iz UZIN-a omogoča prilagodljivo kompenzacijo nivoja velike površine od 5 mm (premer zrna) do 300 mm brez prehodov, obremenitve površine na nosilni podlagi pa so le približno tretjina obremenitve običajnih estrihov (približno 100 kg / m2 pri debelini 5 cm).

Sistem UZIN Turbolight® je v primerjavi s cementnimi estrihi pripravljen za pokrivanje 3 do 4 tedne prej. Tekstilne in elastične talne obloge ter lesene talne obloge lahko na standardni sistem vgradimo po standardnih metodah. Še posebej koristno za obnovo starih zgradb: sistem z 10 dB ponuja celo izjemno absorpcijo udarnega zvoka (debelina 4 cm po DIN EN ISO 140-8).

Prenesi

Video o aplikaciji: Kako lahko velike neravnine hitro izravnamo z izredno majhno površinsko težo?

Galerija slik: Kako lahko z neznatno površinsko težo hitro izravnamo večje neravnine?

Position at least 8 mm thick foam expansion strips around all vertical building elements such as walls, supports, pipes, platforms, door frames, etc. This prevents acoustic bridges and stresses resulting from rigid bonding to other building elements.

Prime the prepared substrate with UZIN PE 360 Plus using the UZIN nylon fibre roller. Alternatively, installation on a separating layer is also possible; the minimum thickness of UZIN SC 914 Turbo is then 3 cm.

Mixing UZIN SC 914 Turbo in the screed pump. Empty 2 full sacks of UZIN SC 914 Turbo in the mixer. Now add the required quantity of water (approx. 20 litres) and mix for two minutes. Finally pump to the workplace and apply quickly. UZIN SC 914 Turbo can also be mixed in the mixing trough or gravity mixer. Please refer to the separate processing instructions for additional information.

After mixing, the screed should be spread to the desired thickness using a rake and screed trowel before being and drawn level using a straightedge.

The surface is slightly compressed with the smoothing edge or trowel. With uneven substrates, spreading to granulate thickness (approx. 5 mm) is possible without problem.

Roll out UZIN RR 201 renovation fleece onto the hardened surface of UZIN SC 914 Turbo after a waiting time of at least 48 hours* and then cut to size with scissors. Lay the fleece loosely over the whole surface with at least 2 cm overlap between lengths. * At 20 °C and 65 % relative humidity.

Mix UZIN NC 195 thin screed with clear, cold water and apply with the specified amount (20 kg/m²). Crack inducer joints need to be created in the thin screed in the area of door cases. They can be closed with UZIN NC 182 before installing the floor covering or fine levelling. It may be necessary to apply a fine levelling compound such as UZIN NC 170 LevelStar, depending on the floor covering to be applied. In this case prime with UZIN PE 360 Plus first.

Textile and elastic floor coverings as well as wood flooring may be installed using the Standard methods once the thins screed has reached its readiness for covering (at 20 °C and 65 % relative humidity).

Sistem UZIN Turbolight® je hitra, izjemno lahka in prilagodljiva podlaga.

Valentin Zeiler
Tehnične storitve UZIN

UZIN NC 195 Tankoslojni estrih

Trdna samorazlivna cementna izravnalna masa za izvedbo tankoslojnih estrihov v debelini od 3 do 40 mm.

Data sheet

Display product

UZIN PE 360 Univerzalni predpremaz

Univerzalni disperzijski predpremaz brez topil, za vpojne podlage

Data sheet